Pocket
ROMulator
Supports 2716 -27256 sized EPROM Emulation. Battery memory
backup. Make transparent changes to Rom image while CPU is running.
Very popular with EFI hackers. The Romulator allows car folks to make
changes while-the-engine-is-running! No need to stop and start the
engine. Also
used for Microprocessor developers. Auto EFI/ECU folks new at this
should see the
faq. Comes with windows software and a command line driver.
- Lots of third party support lets you work with many car types.
- Auto-update
feature lets you point at a file and it will automatically update the
ROM image anytime a change is made - this lets you use any rom editor
to do real-time changes!
- 90 day warranty - covers any failure other than
driving over unit, underwater use, etc. (please use a ground
strap)
Has a limited address watch capabilities to help figure out
fuel maps etc. Note: the Romulator or the ROMmutator is now
called the Pocket-ROMmulator. See usb
for USB to serial adapters.
For help see Romulator
FAQs or EFI/ECU-FAQs.
See
Updates
| Hardware |
|---|
| ROM types Emulated |
27(C)16, 27(C)32, 27(C)64, 27(C)128, 27(C)256, 29C256
(27(C)512 PKT-ROM2 only) |
| Access Time |
100ns |
| Cable |
DB9 Pins used are 2, 3, 5. |
| Serial port setup |
Baud Rate - 115.2K Baud, 8 Bit, 1 Stop Bit, No Parity, No
Hand Shake (End of command string is by time out from last byte
received.) Works with our USB to Serial adapters |
| Power |
Power is taken from both the socket of the Rom you are
emulating to and from the Serial port (TD pin3, CTS 4 , DTR 7) . Pin 24
provides power when emulating 2716/2732 and Pin 28 for
2764/27128/27256/27512. This is done automatically and does not require
any changes. Backup is provided via a backup battery that will last
about a year. |
| Software Commands |
| Load Buffer |
Loads file to buffer RAM in your PC |
| Save Buffer |
Saves buffer RAM to a file |
| Select file type |
Select from Binary, Intel HEX, Moto hex, Ascii HEX file types
(most often Binary) |
| Fill Buffer |
Fills buffer with constant byte |
| Edit buffer |
Starts a full featured Hex/ascii Editor to work on the buffer
- makes real-time changes that are hidden for the computer under test. |
| Buffer to ROM |
Moves buffer contents to ROM |
| Rom to Buffer |
moves ROM contents to Buffer |
| ED buffer |
Starts a full featured Hex/ascii Editor to work directly on
the contents of the ROM memory |
| Verify |
Compares Buffer to ROM memory and reports what and where it
is different |
| ROM offsets |
Manually set Buffer start and stop addresses |
| COM select |
Set which COM port you are using. |
|
Toshiba PLCs
Motor Protectors
