Want to run control equipment
off of a vehicle's electric system?
The 50W12DC24 (SD-50A-24) 50 watt DC to DC switching power supply takes your car or trucks nominal
12 volt power and converts it to a regulated 24Vdc at just over 2A to
supply PLCs and other industrial control equipment. A wide 2:1 input
range and 100% full load burn-in makes this a reliable way to take your
control process on the road.
| Specifications |
| Output
Voltage Adj: |
23 to 30Vdc |
| Input voltage range |
9.2 to 18Vdc |
| Minimum output current |
0A |
| Maximum output current |
2.1A |
| Power |
50.4Watts |
| Line
Regulation |
±0.5% max |
| load Regulation |
±0.5% max |
| Over
Load Protection |
105%~150%
output pulsing mode |
| Over
Voltage Protection |
115%~165%
of output voltage |
| I/O isolation |
1500VAC |
| Withstand
voltage |
I/P-O/P:1.5KV,
I/P-FG:1.5KV, 1min |
| Isolation
Resistance |
100MW
(min) @ 500 VDC |
| Physical
and Safety Specifications |
| Operating
Temperature |
-10°C
to +60°C |
| Enclosure |
metal case 159 X 97 X 38
(mm)
[6.26 X 3.82 X 1.50 (inches)] |
| Safety
standard |
meet
LVD |
| EMC
Standard |
EN55022
class B, EN61000-4-2,3,4,6,8 |
Picture shows power supply with
the din-rail
mounting accessory.
AKA SD-50A-24
|
Toshiba PLCs
Test Equipment
